China Ewr-L1 Wheelchair Ramp for Low Floor Bus Loading 350kg

EWR-L SERIES
ELECTRIC WHEELCHAIR RAMP
1. Introduction
Electric wheelchair ramp can be applied on low-floor city bus and installed underside of passenger door step. When vehicle arrives at stop, the driver control the switch, and then platform can be extended and retracted smoothly. When the platform reach working position, the rear-end of ramp will raise automatically to eliminate height of threshold of passenger door so as to ensure rear-end of platform level up to vehicle floor, convenient for wheelchair to access vehicle.
This electric wheelchair ramp has got two patents (Patent NO. ZL 02 2 83133.9 and ZL 2006 20005099.5).

ModelDrive ModePlatform Size(LxW)InstallationEWR-L1Electric1035*1007 mmunder vehicle floorEWR-L7Electric995*1007 mmunder vehicle floor

2. Technical Parameter
Unit: mm

ModelPlatform Size (A*B)Overall Width (C)Overall Height (D)Overall Length (E)Loading CapacityOwn
WeightEWR-L11035*10071125 mm70 mm1428 mm350 Kg50 KgEWR-L7995*1007112570 mm1459 mm350 Kg50 Kg

Safety Function: Adopt anti-skid aluminum plate on the surface of platformWith sound and flashlight alarm during operation of wheelchair rampWith danger alarm on the outer-edge of rampIn the course of the ramp extends, if it touches any barrier, the ramp will retract automatically. For a moment, it will extend again. If this status repeats 3 times, then the ramp retracts to the rest position for safety.The ramp is interlocked with passenger door.

3. Installation Requirements
Unit: mm

ModelNet Width of DoorAccessible Width Under VehicleAccessible Height Under VehicleAccessible Depth Under VehicleRemarkEWR-L1101011252001500 EWR-L7101011252001500